Pujiang Yangli Chain Co., Ltd. believes that tools such as hammers, pliers, and wires are required to install tire chains. A flat area on a loader where the air around one-third of the tire is vented. The chain is unrolled and the tires paved ahead need to be filled. Remove the accessories and hang the end of the chain with a wire of about 1 meter. Also, to turn on the loader, note that the front of the tire is facing the chain.
The tire tread is caught with a wire and while the chain is straightened with a crowbar, the vehicle moves backward slowly until the protective film wraps the entire chain up to the tire (rear wheel, rear wheel forward). Warm reminder, consult the price of forklift tire snow chains and tire snow chains, and we can chat in detail. Once the ends of the chain are lined up, connect the ends with connecting joints. Fasten the chain on the outside of the tire and adjust it to tighten it. Check the locking ring of the tire protection chain, the welded joint should be outward to prevent tire wear.